Features
Key Features
One-cable-to-the table connectivity supports PoE+ and Dante audio networking to maximize ease of integration
Internal 12 volt supply for localized sourcing of power for microphone LEDs
Dual network and power connectors allow daisy-chaining of multiple ControlSpace EX endpoints
Rotatable mounting tabs allow for multiple installation options
Low-profile aluminum enclosure for unobtrusive undertable mounting
Simplified software configuration via ControlSpace Designer software. Supports auto-discovery, auto-routing, and logic presets for microphone LEDs and pushbuttons.
Integrated power and signal indicators via recessed LEDs Optional magnetic mounting plate simplifies single-handed installation
Accessory 60 W power supply available for increased endpoint connectivity
AUDIO INPUTS
Input channels: Four (8) analog, balanced microphone/line level
Connectors: Four (8) 3.81 mm detachable Euroblock connectors, 7-pin
Phantom power: +48 VDC, software selectable per input
Control GPIO: 2 logic outputs (100 mA low, 8 V open, 10 mA @ 2.5 V high)
: 1 logic input (0 to 5 V, threshold = 1.6 V, 2 kΩ pull-up to 5 V)
Gain settings: 0 / +15 / +30 / +45 dB, software selectable
Input impedance: >1.8 kΩ at any gain setting
Equivalent input noise: –115 dBu (+45 dB gain)
Maximum input level: +8 dBu (0 dB gain)
System THD <0.01 % at any gain setting, input signal 3 dB below maximum
Frequency response: 20 Hz — 20 kHz, ±1 dB
NETWORK
Connectors: Two (2) RJ-45, one front (supports PoE+), one rear
Audio over IP: Dante™ Ultimo X4
POWER
Microphone LED power; +12 VDC, 200 mA
PoE class; Class 0 802.3at PoE+, PD compliant
Connectors; (2) 3.81 mm Euroblock connector, 2-pin
External power supply: +12 VDC, daisy-chainable
Power consumption 4.3 W plus 1 W for phantom power if used
Maximum PoE+ power: 24 W (internal +12 VDC output)
SOFTWARE APPLICATIONS
Configuration: ControlSpace Designer software v5.0 or late
GENERAL
LED status indicators: Power LED, four (4) tri-color signal status for input channels
Digital conversion: 48 kHz / 24-bit
Certifications: FCC Part 15 Class A; UL 60950-1, 2nd edition, 2014-10-14, CAN/CSA C22.2 No. 60950-1-07, 2nd edition, 2014-10, IEC 60950-1:2005 (2nd edition)
Operating temperature: 0 °C to 40 °C (32 °F to 104 °F)
Accessories: ControlSpace EX Endpoint Microphone Extension Cable (790081-0010)
: ControlSpace EX Endpoint Mounting Bracket (790080-0110)
: ControlSpace EX Endpoint Power Supply (800446-1110)
PRODUCT CODES
ControlSpace EX‑8ML: CONTROLSPACE EX 8-CH MIC/GPIO Dante UTB (772045-0110)
